When applying latex paint, you must have special tools for it, such as latex paint roller brush. I believe that everyone is familiar with latex paint roller brushes, and may not know how to use latex paint roller brushes. So next, let’s talk about the relevant knowledge of latex paint roller brush for everyone to read.
1. Before painting, the latex paint roller brush should be washed with clean water before use, soak it with water or thinner, and then wick the excess water away from the waste paper before dipping the paint.
2. When painting, immerse half of the roller brush in the latex paint when dipping it, and then roll it back and forth on the roller tray a few times to make the latex paint evenly distributed; when using it, it should be from top to bottom and then from top to bottom. The bottom-up method is to roll the latex paint on the base layer, and then roll it horizontally. The width of each brush is about 4 times the length of the roller, and the width of the roller should be overlapped at one third. Otherwise, there will be rolling marks at the junction; in order to ensure uniform rolling and save latex paint, the two ends of the roller brush should be evenly applied during the rolling process. At the beginning, you can lighten it slightly because there are more materials, and then Gradually increase the weight, you can ingeniously use the roller to flip to roll coating, but the speed should not be too fast to prevent splashing of the paint, and you can choose different sizes of roller brushes according to different areas.
3. After painting, after the roller brush is used, stand it upright on the table, and then use the other hand to put the cover on one side, take the roller sleeve out of the bracket, wash and dry it for preparation Use it next time.