Wall painting is one of the most important processes in home decoration. Usually the wall painting is finished, which also represents the completion of the hard decoration part. If you start to arrange the soft decoration and find that the wall is uneven, it is very troublesome to remedy the construction, so you must pay attention to the paint evenly when painting the wall. Here are a few instructions to make the wall paint more even Skills.
1. Wall cleaning
If you want to paint more evenly, you must do a good job in the preliminary treatment. Clean up the substrate before painting, so that the surface of the wall can be initially smooth and clean. If the wall surface has been painted with the primer, you need to use fine sandpaper to smooth the uneven areas after the primer is dry, so that the overall uniformity and smoothness of the wall after the finish is higher.
It should be noted here that do not polish horizontally when polishing. We usually paint up and down in the order of brushing. Therefore, it is recommended to polish up and down when polishing. Follow the texture of the paint to reduce the polishing marks and improve the feel. Also better.
In addition to uneven walls, you should also pay attention to the color of the wall paint to avoid color difference and uneven color. This is also a very undesirable painting effect. When toning, you must first calculate the amount of paint. I’d rather buy more than less. Choose the main paint and auxiliary paint, and mix them evenly according to a certain ratio when mixing.
3. Dip the paint
Usually, a large part of the reason for uneven painting is that there is more paint on the brush, and the amount of paint is too thick when the first paint is painted. This is one of the reasons for uneven paint. Therefore, when we paint, we must pay special attention not to make the paint on the brush too full. The brush with paint during painting should be gently wiped on the surface of the container, and the excess paint on the brush should be passed over first.
In addition to the preparation work, the most important step to make the paint uniform is of course the construction. Painting is mainly divided into three bottoms: top, bottom and top. Start painting from the position where you stopped last time, first brush upwards, then pull back to the starting place, and finally pull upwards again, and the brush is complete. In addition, painting usually starts from a high place, so as to avoid soiling the painted paint and avoid repeated application.
After the previous steps, whether the brushed effect is even depends on the final inspection. When monitoring, you need to pay attention to whether there are obvious chromatic aberrations or obvious protrusions and other shortcomings. At this time, you can hit the light on the wall, and the effect of painting is clear at a glance.
Finally, when choosing a paint, try to choose a paint with less environmental pollution, and try to wear a mask during construction, and at the same time avoid paint splashing into your ears, nose and mouth.